PartsTable
Technical Data Sheet
Download PDF

21630 2 — CLEVIS,ROD END

✓ Government record, cited
Hama · BOLT SCREW
PRODUCT OVERVIEW

21630 2: CLEVIS,ROD END.

- True colour reproduction on the display ensures brilliant colours - Antistatic microfibre cloth for cleaning the sensitive display and applicator - Foil can be removed without leaving any marks This part is cataloged in the U.S. Government catalog under NSN 5305-00-021-6302, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
21630 2
NSN: 5305-00-021-6302
NIINs: 000216302, 017110177
FSC: 5305 — Screws
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL BODY
overall_width3.50 INCHES NOMINAL IN
fork_span_width1.0 INCHES NOMINAL IN
securing_pin_hole_diameter0.625 INCHES NOMINAL IN
NSN5305-00-021-6302
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 21630 2 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.472 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.472 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SUBSTITUTES & CROSS-REFERENCES 1
MS35242-90Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 21630 2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 21630 2?
21630 2 is a CLEVIS,ROD END manufactured by Hama.
What parts can replace 21630 2?
There is 1 known substitute for 21630 2: MS35242-90. Substitute compatibility should be verified for your specific system.
What is the NSN for 21630 2?
21630 2 is cataloged in the U.S. Government catalog under NSN 5305-00-021-6302. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 21630 2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.