PartsTable
Technical Data Sheet
PartsTable / MRO / 216 002
216 002 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL COMP 410, body_style: TUBE TYPE, end_similarity: NOT IDENTICAL, overall_length: 0.787 INCHES NOMINAL IN, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-031-6363, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 216 002
NSN: 5340-00-031-6363
FSC: 5340
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410
body_styleTUBE TYPE
end_similarityNOT IDENTICAL
overall_length0.787 INCHES NOMINAL IN
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
first_leg_length0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
overall_diameter0.197 INCHES NOMINAL IN
second_leg_styleEND RADIUS
second_leg_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_featuresMANUALLY OPERATED
NSN5340-00-031-6363
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 216 002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG THICKNESS: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG LENGTH: 0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
•
FIRST LEG WIDTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
SECOND LEG HOLE DIAMETER: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
SECOND LEG WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
FIRST LEG LENGTH0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
FIRST LEG WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG HOLE DIAMETER0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
STYLE DESIGNATORANGLE
FIRST LEG ANGLE90.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
R4141FInterchangeable
interchangeable cross-reference
interchangeable
5940001139828Interchangeable
interchangeable cross-reference
interchangeable
AA5110-04Interchangeable
interchangeable cross-reference
interchangeable
216002Interchangeable
interchangeable cross-reference
interchangeable
F26912AInterchangeable
interchangeable cross-reference
interchangeable
S500-2AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 216 002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 216 002?
216 002 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 216 002?
There are 6 known substitutes for 216 002: R4141F, 5940001139828, AA5110-04 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 216 002?
216 002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-031-6363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 216 002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026