PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 215ZDBLV1
215ZDBLV1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, housing_bore_diameter: 4.003 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.938 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-0498, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
215ZDBLV1
NSN: 5330-00-154-0498
FSC: 5330
CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
housing_bore_diameter4.003 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.938 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-0498
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 215ZDBLV1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 4.003 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 2.938 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.375 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
MATERIALSTEEL CASE
HOUSING BORE DIAMETER4.003 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER2.938 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
P1004Interchangeable
interchangeable cross-reference
interchangeable
4298675-1Interchangeable
interchangeable cross-reference
interchangeable
A115295Interchangeable
interchangeable cross-reference
interchangeable
7-511B11085-1Interchangeable
interchangeable cross-reference
interchangeable
NP10041PC11Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 215ZDBLV1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 215ZDBLV1?
215ZDBLV1 is a SEAL,PLAIN ENCASED.
What parts can replace 215ZDBLV1?
There are 5 known substitutes for 215ZDBLV1: P1004, 4298675-1, A115295 and 2 more. Substitute compatibility should be verified for your specific system.
Is 215ZDBLV1 still available?
215ZDBLV1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 215ZDBLV1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026