PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 215WD
215WD ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 75.00 MILLIMETERS NOMINAL MM, overall_width: 25.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6416, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
215WD
NSN: 3110-00-155-6416
FSC: 3110
CAGE: 8E499 — KOEHRING CRANES AND EXCAVATORS INC SUB OF NORTHWEST ENGINEERING CO (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter75.00 MILLIMETERS NOMINAL MM
overall_width25.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter130.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-155-6416
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 215WD · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
MATERIAL: STEEL BALL
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL BALL
MATERIALSTEEL SHIELD
MATERIALSTEEL INNER RING
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OUTER RING
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER130.00 MILLIMETERS NOMINAL MM
BORE DIAMETER75.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
5963Interchangeable
interchangeable cross-reference
interchangeable
326Interchangeable
interchangeable cross-reference
interchangeable
ST281Interchangeable
interchangeable cross-reference
interchangeable
7215Interchangeable
interchangeable cross-reference
interchangeable
7215SYZQEInterchangeable
interchangeable cross-reference
interchangeable
3101-1204Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 215WD?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 215WD?
215WD is a BEARING,BALL,ANNULAR.
What parts can replace 215WD?
There are 29 known substitutes for 215WD: 5963, 326, ST281 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 215WD?
215WD is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6416. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 215WD

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026