The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY K-500, first_leg_angle: 85.8 DEGREES NOMINAL, first_leg_style: ANGLE, second_leg_style: ANGLE, special_features: TWO RIVET HOLES, 0.100 IN, ONE EACH ON ALTERNATE SIDES OF LARGER SECOND LEG HOLE ALONG LENGTH IN, style_designator: ANGLE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-496-9288, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2158M43G01
NSN:5340-01-496-9288 FSC:5340 — Hardware, Commercial CAGE:07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
material
NICKEL ALLOY K-500
first_leg_angle
85.8 DEGREES NOMINAL
first_leg_style
ANGLE
second_leg_style
ANGLE
special_features
TWO RIVET HOLES, 0.100 IN, ONE EACH ON ALTERNATE SIDES OF LARGER SECOND LEG HOLE ALONG LENGTH IN
style_designator
ANGLE
features_provided
NUT
first_leg_thickness
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
second_leg_thickness
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
end_item_identification
F110 ENGINE
first_leg_hole_diameter
0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
second_leg_hole_diameter
0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
NSN
5340-01-496-9288
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG HOLE DIAMETER: 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 85.8 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5599 NATIONAL SPEC ALL MATERIAL RESPONSES
TECHNICAL CHARACTERISTICS
FIRST LEG HOLE DIAMETER
0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
FIRST LEG ANGLE
85.8 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLE
ONE HOLE
STYLE DESIGNATOR
ANGLE
FIRST LEG STYLE
ANGLE
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 5599 NATIONAL SPEC ALL MATERIAL RESPONSES
FEATURES PROVIDED
NUT
SECOND LEG THICKNESS
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2158M43G01?
2158M43G01 is a BRACKET,ANGLE.
What parts can replace 2158M43G01?
There is 1 known substitute for 2158M43G01: 2158M43. Substitute compatibility should be verified for your specific system.
What is the NSN for 2158M43G01?
2158M43G01 is cataloged in the U.S. Government catalog under NSN 5340-01-496-9288. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.