PartsTable
Technical Data Sheet
PartsTable / MRO / 215244
215244 ✓ Verified by PartsTable
iDeal of Sweden · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The "Northern Lights'' Fashion Case is the seasonal expression of the marble inspired print. The design is inspired by aerial views, structures and rocks found in nature. The colours encompass the wonderment of the Northern Lights with its alluring displays that dance through the night sky, enchanting its surroundings.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-6558, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 215244
NSN: 5330-00-179-6558
FSC: 5330
CAGE: 20288 — KEYSTONE RUBBER PRODUCTS CORP (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.510 INCHES MAXIMUM IN
body_height0.090 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
body_length0.560 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
hole_diameter0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
hardness_rating35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
terminal_length1.000 INCHES MINIMUM IN
outside_diameter15.000 INCHES NOMINAL IN
special_features8 MOULDED BUTTONS EQUALLY SPACED IN 14.274 IN. DIA IN
style_designatorCIRCULAR
aperture_diameter13.060 INCHES NOMINAL IN
NSN5330-00-179-6558
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 215244 MFR: iDeal of Sweden ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 13.060 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 15.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HARDNESS RATING: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
•
BOLT CIRCLE DIAMETER: 12.274 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 8
•
HOLE DIAMETER: 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.250 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER13.060 INCHES NOMINAL IN
OUTSIDE DIAMETER15.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HARDNESS RATING35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
BOLT CIRCLE DIAMETER12.274 INCHES NOMINAL IN
BOLT HOLE QUANTITY8
HOLE DIAMETER0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.250 INCHES NOMINAL IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
336C029H29Interchangeable
interchangeable cross-reference
interchangeable
CM05B621KN3Interchangeable
interchangeable cross-reference
interchangeable
2006588-621Interchangeable
interchangeable cross-reference
interchangeable
67A312D112Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 215244?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 215244?
215244 is a CAPACITOR,FIXED,MICA DIELECTRIC manufactured by iDeal of Sweden. It is classified as a MRO (MRO_GENERAL).
What parts can replace 215244?
There are 4 known substitutes for 215244: 336C029H29, CM05B621KN3, 2006588-621 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 215244?
215244 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-6558. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 215244

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026