PartsTable
Technical Data Sheet
Download PDF

215219 — CAP-PLUG,PROTECTIVE,DUST AND MOI

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

215219: CAP-PLUG,PROTECTIVE,DUST AND MOI.

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC POLYURETHANE AND STEEL, special_features: THREADED STUD 1/4 INCH DIA BY 1/2 INCH LONG INSIDE POLYURETHANE CAP IN, end_item_identification: TEST SET INTERIAL P/N 2056AS953-01, open_end_inside_diameter: 0.500 INCHES NOMINAL IN, closed_end_overall_diameter: 0.810 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: POLYURETHANE CAP. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-580-0272, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
215219
NSN: 5340-01-580-0272
FSC: 5340 — Hardware, Commercial
CAGE: 1HL09 — DOVER CORP DE-STA-CO DIV (USA)
SPECIFICATIONS
materialPLASTIC POLYURETHANE AND STEEL
special_featuresTHREADED STUD 1/4 INCH DIA BY 1/2 INCH LONG INSIDE POLYURETHANE CAP IN
end_item_identificationTEST SET INTERIAL P/N 2056AS953-01
open_end_inside_diameter0.500 INCHES NOMINAL IN
closed_end_overall_diameter0.810 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyPOLYURETHANE CAP
NSN5340-01-580-0272
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 215219 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 0.810 INCHES NOMINAL IN
•
OPEN END INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYURETHANE AND STEEL
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER0.810 INCHES NOMINAL IN
SPECIAL FEATURESTHREADED STUD 1/4 INCH DIA BY 1/2 INCH LONG INSIDE POLYURETHANE CAP IN
OPEN END INSIDE DIAMETER0.500 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPOLYURETHANE CAP
END ITEM IDENTIFICATIONTEST SET INTERIAL P/N 2056AS953-01
MATERIALPLASTIC POLYURETHANE AND STEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
26021364-101Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 215219?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 215219?
215219 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 215219?
There is 1 known substitute for 215219: 26021364-101. Substitute compatibility should be verified for your specific system.
What is the NSN for 215219?
215219 is cataloged in the U.S. Government catalog under NSN 5340-01-580-0272. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 215219