PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 215003S60
215003S60 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.735 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN, sealing_element_style: VERTICAL-ANGULAR, accommodated_shaft_diameter: 2.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-086-7863, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
215003S60
NSN: 5330-00-086-7863
FSC: 5330
CAGE: 81596 — FEDERAL-MOGUL CORP SEALING PRODUCTS GROUP VAN WERT PLANT (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.735 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter2.625 INCHES NOMINAL IN
NSN5330-00-086-7863
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 215003S60 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
CASE STYLE: SQUARE
•
MATERIAL: STEEL CASE
•
SEAL WIDTH: 0.735 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 2.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEVERTICAL-ANGULAR
CASE STYLESQUARE
MATERIALSTEEL CASE
SEAL WIDTH0.735 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER2.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
262-3623-24Interchangeable
interchangeable cross-reference
interchangeable
L7111Interchangeable
interchangeable cross-reference
interchangeable
98005R91Interchangeable
interchangeable cross-reference
interchangeable
455071Interchangeable
interchangeable cross-reference
interchangeable
VA570104Interchangeable
Same NIIN cross-reference
interchangeable
450071Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 215003S60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 215003S60?
215003S60 is a SEAL,PLAIN ENCASED.
What parts can replace 215003S60?
There are 8 known substitutes for 215003S60: 262-3623-24, L7111, 98005R91 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 215003S60?
215003S60 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-086-7863. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 215003S60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026