PartsTable
Technical Data Sheet
Download PDF

215-82406-1 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

215-82406-1: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.4993 INCHES MINIMUM AND 0.4997 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, surface_finish: GROUND, inner_ring_width: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, outer_ring_width: 0.6510 INCHES MINIMUM AND 0.6560 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-225-2896, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
215-82406-1
NSN: 3110-00-225-2896
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 80378 — TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT INTEGRATED PROGRAMS DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.4993 INCHES MINIMUM AND 0.4997 INCHES MAXIMUM IN
alignment_typeSELF-ALIGNING
surface_finishGROUND
inner_ring_width0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
outer_ring_width0.6510 INCHES MINIMUM AND 0.6560 INCHES MAXIMUM IN
special_featuresOIL HOLE AND GROOVE IN INNER RING,OUTER RING AND ALIGNING RING ALSO 0.0002 IN. MIN 0.0014 IN. MAX RADIAL CLEARANCE IN A 1.4991 IN. RING GAGE IN
style_designatorAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
features_providedALIGNING RING
surface_treatmentCADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE EXPOSED SURFACES AS MOUNTED
lubrication_materialGREASE
self-alignment_locationINTERNAL
NSN3110-00-225-2896
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 215-82406-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.6510 INCHES MINIMUM AND 0.6560 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: AIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
•
FEATURES PROVIDED: ALIGNING RING
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.6510 INCHES MINIMUM AND 0.6560 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
SURFACE FINISHGROUND
STYLE DESIGNATORAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
FEATURES PROVIDEDALIGNING RING
ALIGNMENT TYPESELF-ALIGNING
SPECIAL FEATURESOIL HOLE AND GROOVE IN INNER RING,OUTER RING AND ALIGNING RING ALSO 0.0002 IN. MIN 0.0014 IN. MAX RADIAL CLEARANCE IN A 1.4991 IN. RING GAGE IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
AD35526Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 215-82406-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 215-82406-1?
215-82406-1 is a BEARING,ROLLER,NEEDLE.
What parts can replace 215-82406-1?
There is 1 known substitute for 215-82406-1: AD35526. Substitute compatibility should be verified for your specific system.
What is the NSN for 215-82406-1?
215-82406-1 is cataloged in the U.S. Government catalog under NSN 3110-00-225-2896. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 215-82406-1