PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 215-47301-5
215-47301-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OR STEEL COMP 304, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.500 INCHES NOMINAL IN, first_leg_length: 0.625 INCHES NOMINAL IN, second_leg_style: END RADIUS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-877-5339, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
215-47301-5
NSN: 5340-00-877-5339
FSC: 5340
CAGE: 80378 — TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT INTEGRATED PROGRAMS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OR STEEL COMP 304
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width1.500 INCHES NOMINAL IN
first_leg_length0.625 INCHES NOMINAL IN
second_leg_styleEND RADIUS
second_leg_width0.313 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length0.813 INCHES NOMINAL IN
first_leg_thickness0.093 INCHES NOMINAL IN
second_leg_thickness0.093 INCHES NOMINAL IN
second_leg_end_radius0.156 INCHES NOMINAL IN
NSN5340-00-877-5339
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 215-47301-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG HOLE DIAMETER: 0.164 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
FIRST LEG CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
FIRST LEG LENGTH: 0.625 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD 1ST MATERIAL RESPONSE AND QQ-S-763,CLASS 304 FED SPEC 2ND MATERIAL RESPONSE
•
MATERIAL: STEEL COMP 303 OR STEEL COMP 304
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG HOLE DIAMETER0.164 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
FIRST LEG CORNER RADIUS0.250 INCHES NOMINAL IN
FIRST LEG LENGTH0.625 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD 1ST MATERIAL RESPONSE AND QQ-S-763,CLASS 304 FED SPEC 2ND MATERIAL RESPONSE
MATERIALSTEEL COMP 303 OR STEEL COMP 304
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.250 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.313 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
2369-18Interchangeable
interchangeable cross-reference
interchangeable
2369-3Interchangeable
interchangeable cross-reference
interchangeable
2369-4Interchangeable
interchangeable cross-reference
interchangeable
50188Interchangeable
interchangeable cross-reference
interchangeable
NW23693Interchangeable
interchangeable cross-reference
interchangeable
LE636/29Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 215-47301-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 215-47301-5?
215-47301-5 is a BRACKET,ANGLE.
What parts can replace 215-47301-5?
There are 6 known substitutes for 215-47301-5: 2369-18, 2369-3, 2369-4 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 215-47301-5?
215-47301-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-877-5339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 215-47301-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026