PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 215-00510-4
215-00510-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CASTER,RIGID is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC TREAD, wheel_type: BUILT UP, plate_style: RECTANGULAR, tread_width: 1.750 INCHES NOMINAL IN, wheel_diameter: 5.000 INCHES MINIMUM AND 6.000 INCHES MAXIMUM IN, effective_height: 6.400 INCHES MINIMUM AND 6.700 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-508-2638, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
215-00510-4
NSN: 5340-00-508-2638
FSC: 5340
CAGE: 80378 — TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT INTEGRATED PROGRAMS DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TREAD
wheel_typeBUILT UP
plate_styleRECTANGULAR
tread_width1.750 INCHES NOMINAL IN
wheel_diameter5.000 INCHES MINIMUM AND 6.000 INCHES MAXIMUM IN
wheel_quantity1
effective_height6.400 INCHES MINIMUM AND 6.700 INCHES MAXIMUM IN
style_designatorRIGID
features_providedBRAKE LOCK AND SWIVEL LOCK
caster_plate_width4.000 INCHES NOMINAL IN
caster_plate_length5.000 INCHES NOMINAL IN
safe_operating_load_rating400.0 POUNDS MINIMUM LBS
NSN5340-00-508-2638
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 215-00510-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WHEEL QUANTITY: 1
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 4.000 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 3.000 INCHES NOMINAL IN
•
FEATURES PROVIDED: BRAKE LOCK AND SWIVEL LOCK
•
MATERIAL: RUBBER SYNTHETIC TREAD
•
STYLE DESIGNATOR: RIGID
•
CASTER PLATE LENGTH: 5.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
WHEEL QUANTITY1
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH4.000 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH3.000 INCHES NOMINAL IN
FEATURES PROVIDEDBRAKE LOCK AND SWIVEL LOCK
MATERIALRUBBER SYNTHETIC TREAD
MATERIALALUMINUM ALLOY WHEEL RIM
STYLE DESIGNATORRIGID
CASTER PLATE LENGTH5.000 INCHES NOMINAL IN
PLATE STYLERECTANGULAR
WHEEL TYPEBUILT UP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
13302Interchangeable
interchangeable cross-reference
interchangeable
68797-11Interchangeable
interchangeable cross-reference
interchangeable
417217-3Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
1340Interchangeable
interchangeable cross-reference
interchangeable
407Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 215-00510-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 215-00510-4?
215-00510-4 is a CASTER,RIGID.
What parts can replace 215-00510-4?
There are 17 known substitutes for 215-00510-4: 13302, 68797-11, 417217-3 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 215-00510-4?
215-00510-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-508-2638. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 215-00510-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026