PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 214MS027P007
214MS027P007 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ANODIZE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-141-6974, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214MS027P007
NSN: 5340-00-141-6974
FSC: 5340
CAGE: 04164 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
diameter0.173 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentANODIZE BAND
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.438 INCHES NOMINAL IN
cushioning_environmental_protectionWEATHER RESISTANT
material_document_and_classificationAMS3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end0.735 INCHES NOMINAL IN
surface_treatment_document_and_classificationMIL-A-8625A,TYPE II MIL SPEC SINGLE TREATMENT RESPONSE BAND A
NSN5340-00-141-6974
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 214MS027P007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: HYDRAULIC FLUID
•
DIAMETER: 0.173 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.578 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
MATERIAL: RUBBER CUSHION
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
CUSHIONING ENVIRONMENTAL PROTECTIONHYDRAULIC FLUID
DIAMETER0.173 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.578 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
MATERIALRUBBER CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
LOOP INSIDE DIAMETER0.438 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
214MS027P007Upgraded Successor
successor cross-reference
successor
131 308Interchangeable
interchangeable cross-reference
interchangeable
451006Interchangeable
interchangeable cross-reference
interchangeable
9159891Interchangeable
interchangeable cross-reference
interchangeable
754-2-2-6Interchangeable
interchangeable cross-reference
interchangeable
CVCPICInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 214MS027P007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214MS027P007?
214MS027P007 is a CLAMP,LOOP.
What parts can replace 214MS027P007?
There are 11 known substitutes for 214MS027P007: 214MS027P007, 131 308, 451006 and 8 more. Substitute compatibility should be verified for your specific system.
Is 214MS027P007 still available?
214MS027P007 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214MS027P007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026