PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 214MR027P004
214MR027P004 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: ALUMINUM ALLOY BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.040 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-715-1635, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214MR027P004
NSN: 5340-00-715-1635
FSC: 5340
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
diameter0.173 INCHES NOMINAL IN
materialALUMINUM ALLOY BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.640 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.453 INCHES NOMINAL IN
NSN5340-00-715-1635
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 214MR027P004 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DIAMETER: 0.173 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.640 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY BAND
MATERIALRUBBER SYNTHETIC CUSHION
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.375 INCHES NOMINAL IN
DIAMETER0.173 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.640 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.453 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
9159891Upgraded Successor
successor cross-reference
successor
754-2-2-6Upgraded Successor
successor cross-reference
successor
276-1225P2Interchangeable
interchangeable cross-reference
interchangeable
G650167Interchangeable
interchangeable cross-reference
interchangeable
M4P-LSInterchangeable
interchangeable cross-reference
interchangeable
214MR27P4Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 214MR027P004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214MR027P004?
214MR027P004 is a CLAMP,LOOP.
What parts can replace 214MR027P004?
There are 11 known substitutes for 214MR027P004: 9159891, 754-2-2-6, 276-1225P2 and 8 more. Substitute compatibility should be verified for your specific system.
Is 214MR027P004 still available?
214MR027P004 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214MR027P004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026