PartsTable
Technical Data Sheet

214A042-3S/200 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

214A042-3S/200: BOOT,DUST AND MOISTURE SEAL.

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYOLEFIN BODY, overall_height: 2.090 INCHES NOMINAL IN, style_designator: THRU-HOLE, base_inside_diameter: 2.340 INCHES MINIMUM IN, opening_inside_diameter: 0.750 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-410-7644, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214A042-3S/200
NSN: 5340-01-410-7644
FSC: 5340 — Hardware, Commercial
CAGE: 06090 — TE CONNECTIVITY CORPORATION DBA RAYCHEM PRODUCT DIVISION (USA)
SPECIFICATIONS
materialPLASTIC POLYOLEFIN BODY
overall_height2.090 INCHES NOMINAL IN
style_designatorTHRU-HOLE
base_inside_diameter2.340 INCHES MINIMUM IN
opening_inside_diameter0.750 INCHES MINIMUM IN
NSN5340-01-410-7644
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 214A042-3S/200 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING INSIDE DIAMETER: 0.750 INCHES MINIMUM IN
•
STYLE DESIGNATOR: THRU-HOLE
•
BASE INSIDE DIAMETER: 2.340 INCHES MINIMUM IN
•
MATERIAL: PLASTIC POLYOLEFIN BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.090 INCHES NOMINAL IN
OPENING INSIDE DIAMETER0.750 INCHES MINIMUM IN
STYLE DESIGNATORTHRU-HOLE
BASE INSIDE DIAMETER2.340 INCHES MINIMUM IN
MATERIALPLASTIC POLYOLEFIN BODY
SUBSTITUTES & CROSS-REFERENCES 3
2037AS622-04Reference document
Same NSN cross-reference
Reference document — Secondary reference
2037AS622Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
10138436Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 214A042-3S/200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214A042-3S/200?
214A042-3S/200 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 214A042-3S/200?
There are 3 known substitutes for 214A042-3S/200: 2037AS622-04, 2037AS622, 10138436. Substitute compatibility should be verified for your specific system.
What is the NSN for 214A042-3S/200?
214A042-3S/200 is cataloged in the U.S. Government catalog under NSN 5340-01-410-7644. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214A042-3S/200