PartsTable
Technical Data Sheet

214A011-3/86 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

214A011-3/86: BOOT,DUST AND MOISTURE SEAL.

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYOLEFIN BODY, overall_height: 1.310 INCHES NOMINAL IN, mounting_method: CLAMP, style_designator: THRU-HOLE, base_inside_diameter: 0.800 INCHES NOMINAL IN, opening_inside_diameter: 0.310 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-411-7471, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214A011-3/86
NSN: 5340-01-411-7471
FSC: 5340 — Hardware, Commercial
CAGE: 06090 — TE CONNECTIVITY CORPORATION DBA RAYCHEM PRODUCT DIVISION (USA)
SPECIFICATIONS
materialPLASTIC POLYOLEFIN BODY
overall_height1.310 INCHES NOMINAL IN
mounting_methodCLAMP
style_designatorTHRU-HOLE
base_inside_diameter0.800 INCHES NOMINAL IN
opening_inside_diameter0.310 INCHES MINIMUM IN
NSN5340-01-411-7471
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 214A011-3/86 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING INSIDE DIAMETER: 0.310 INCHES MINIMUM IN
•
MOUNTING METHOD: CLAMP
•
STYLE DESIGNATOR: THRU-HOLE
•
BASE INSIDE DIAMETER: 0.800 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYOLEFIN BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.310 INCHES NOMINAL IN
OPENING INSIDE DIAMETER0.310 INCHES MINIMUM IN
MOUNTING METHODCLAMP
STYLE DESIGNATORTHRU-HOLE
BASE INSIDE DIAMETER0.800 INCHES NOMINAL IN
MATERIALPLASTIC POLYOLEFIN BODY
SUBSTITUTES & CROSS-REFERENCES 3
2041AS905Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
10138429Reference document
Same NSN cross-reference
Reference document — Informative reference only
2041AS905-04Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 214A011-3/86?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214A011-3/86?
214A011-3/86 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 214A011-3/86?
There are 3 known substitutes for 214A011-3/86: 2041AS905, 10138429, 2041AS905-04. Substitute compatibility should be verified for your specific system.
What is the NSN for 214A011-3/86?
214A011-3/86 is cataloged in the U.S. Government catalog under NSN 5340-01-411-7471. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214A011-3/86

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.