PartsTable
Technical Data Sheet
Download PDF

214925 — INSTALLATION AND EQUIPMENT KIT,D

✓ Government record, cited
— · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

214925: INSTALLATION AND EQUIPMENT KIT,D.

INSTALLATION AND EQUIPMENT KIT,D. Key specifications include body_length: 2.000 INCHES NOMINAL IN, thread_class: 3B, inside_diameter: 3.001 INCHES MINIMUM AND 4.998 INCHES MAXIMUM IN, outside_diameter: 14.875 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, mounting_hole_type: THREADED. This part is cataloged in the U.S.

Government catalog under NSN 2520-00-420-4418, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 214925
NSN: 2520-00-420-4418
NIINs: 004204418, 015444346
FSC: 2520 — Vehicular Power Transmission Components
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
body_length2.000 INCHES NOMINAL IN
thread_class3B
inside_diameter3.001 INCHES MINIMUM AND 4.998 INCHES MAXIMUM IN
outside_diameter14.875 INCHES NOMINAL IN
thread_directionRIGHT-HAND
mounting_hole_typeTHREADED
bolt_circle_diameter14.125 INCHES NOMINAL IN
fsc_application_dataVEHICULAR POWER TRANSMISSION COMPONENTS
mounting_hole_quantity3
end_item_identificationTRACK MANAGEMENT SYS; RAM 122
thread_size_and_series/type_designator0.375-16 UNIFIED NATIONAL COARSE (UNC)
part_name_assigned_by_controlling_agencySPLITTER ASSY
NSN2520-00-420-4418
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 214925 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 214925 MFR OEM
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 3
•
FSC APPLICATION DATA: VEHICULAR POWER TRANSMISSION COMPONENTS
•
OUTSIDE DIAMETER: 14.875 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
BODY LENGTH: 2.000 INCHES NOMINAL IN
•
INSIDE DIAMETER: 3.001 INCHES MINIMUM AND 4.998 INCHES MAXIMUM IN
•
BOLT CIRCLE DIAMETER: 14.125 INCHES NOMINAL IN
•
THREAD CLASS: 3B
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY3
FSC APPLICATION DATAVEHICULAR POWER TRANSMISSION COMPONENTS
OUTSIDE DIAMETER14.875 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
BODY LENGTH2.000 INCHES NOMINAL IN
INSIDE DIAMETER3.001 INCHES MINIMUM AND 4.998 INCHES MAXIMUM IN
BOLT CIRCLE DIAMETER14.125 INCHES NOMINAL IN
THREAD CLASS3B
THREAD SIZE AND SERIES/TYPE DESIGNATOR0.375-16 UNIFIED NATIONAL COARSE (UNC)
MOUNTING HOLE TYPETHREADED
SUBSTITUTES & CROSS-REFERENCES 3
149460Reference document
Same NSN cross-reference
Reference document — Secondary reference
G73878Reference document
Same NSN cross-reference
Reference document — Secondary reference
73878Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 214925?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214925?
214925 is a INSTALLATION AND EQUIPMENT KIT,D. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 214925?
There are 3 known substitutes for 214925: 149460, G73878, 73878. Substitute compatibility should be verified for your specific system.
What is the NSN for 214925?
214925 is cataloged in the U.S. Government catalog under NSN 2520-00-420-4418. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214925