PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 214633
214633 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, hole_depth: 0.312 INCHES NOMINAL IN, shank_length: 0.375 INCHES NOMINAL IN, hole_diameter: 0.125 INCHES NOMINAL IN, overall_height: 0.844 INCHES NOMINAL IN, material_hardness_rating: 50.0 DUROMETER MINIMUM AND 55.0 DUROMETER MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-193-7652, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214633
NSN: 5330-00-193-7652
FSC: 5330
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
materialRUBBER
hole_depth0.312 INCHES NOMINAL IN
shank_length0.375 INCHES NOMINAL IN
hole_diameter0.125 INCHES NOMINAL IN
overall_height0.844 INCHES NOMINAL IN
material_hardness_rating50.0 DUROMETER MINIMUM AND 55.0 DUROMETER MAXIMUM
outside/top_flange_diameter0.750 INCHES NOMINAL IN
material_document_and_classificationJOHNSON RUBBER CO, CAGE 75183, 2411 MFR REF SINGLE MATERIAL RESPONSE
NSN5330-00-193-7652
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 214633 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
202955Interchangeable
interchangeable cross-reference
interchangeable
14019Interchangeable
interchangeable cross-reference
interchangeable
214633Interchangeable
interchangeable cross-reference
interchangeable
5330001937652Interchangeable
Same NIIN cross-reference
interchangeable
134276Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 214633?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214633?
214633 is a BUMPER.
What parts can replace 214633?
There are 5 known substitutes for 214633: 202955, 14019, 214633 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 214633?
214633 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-193-7652. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214633

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026