PartsTable
Technical Data Sheet
Download PDF

214428 — SHAFT,DRIVE,FLEXIBLE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

214428: SHAFT,DRIVE,FLEXIBLE.

The SHAFT,DRIVE,FLEXIBLE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.198 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.557 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN, thread_length: 0.625 INCHES MAXIMUM IN, fastener_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-021-4428, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214428
NSN: 5305-00-021-4428
NIINs: 000214428, 011086735, 011313355
FSC: 5305 — Screws
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
head_styleROUND
head_height0.198 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.557 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
thread_length0.625 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.312 INCHES IN
screw_surface_treatmentCADMIUM OR ZINC
thread_quantity_per_inch24
NSN5305-00-021-4428
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 214428 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.198 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES
•
THREAD LENGTH: 0.625 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.198 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
FASTENER LENGTH0.625 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES
THREAD LENGTH0.625 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1S STYLE AND I TYPE
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
SUBSTITUTES & CROSS-REFERENCES 1
FFS92TYPE1STYLE1SReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 214428?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214428?
214428 is a SHAFT,DRIVE,FLEXIBLE.
What parts can replace 214428?
There is 1 known substitute for 214428: FFS92TYPE1STYLE1S. Substitute compatibility should be verified for your specific system.
What is the NSN for 214428?
214428 is cataloged in the U.S. Government catalog under NSN 5305-00-021-4428. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214428