PartsTable
Technical Data Sheet
Download PDF

2144089-1 — CATCH,FLUSH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2144089-1: CATCH,FLUSH.

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 1.910 INCHES NOMINAL IN, length: 2.250 INCHES NOMINAL IN, material: UNABLE TO DECODE, special_features: DOWELL PINS INCLUDED;2 MTG SLOTS;MATL:BODY STEEL,HANDLE STEEL,CLAW STEEL, features_provided: SCREW AND WASHER, end_item_identification: AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); JOINT STARS TARGET RA. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-704-0775, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2144089-1
NSN: 5340-00-704-0775
FSC: 5340 — Hardware, Commercial
CAGE: 19315 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS (USA)
SPECIFICATIONS
width1.910 INCHES NOMINAL IN
length2.250 INCHES NOMINAL IN
materialUNABLE TO DECODE
special_featuresDOWELL PINS INCLUDED;2 MTG SLOTS;MATL:BODY STEEL,HANDLE STEEL,CLAW STEEL
features_providedSCREW AND WASHER
end_item_identificationAIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); JOINT STARS TARGET RA
NSN5340-00-704-0775
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2144089-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.250 INCHES NOMINAL IN
•
FEATURES PROVIDED: SCREW AND WASHER
•
WIDTH: 1.910 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
LENGTH2.250 INCHES NOMINAL IN
FEATURES PROVIDEDSCREW AND WASHER
SPECIAL FEATURESDOWELL PINS INCLUDED;2 MTG SLOTS;MATL:BODY STEEL,HANDLE STEEL,CLAW STEEL
WIDTH1.910 INCHES NOMINAL IN
END ITEM IDENTIFICATIONAIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); JOINT STARS TARGET RA
MATERIALUNABLE TO DECODE
SUBSTITUTES & CROSS-REFERENCES 8
53002141Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A20034-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
529260C90187Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TQ-64001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TQ-64003Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2180869-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2144089-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2144089-1?
2144089-1 is a CATCH,FLUSH.
What parts can replace 2144089-1?
There are 8 known substitutes for 2144089-1: 53002141, A20034-1, 529260C90187 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2144089-1?
2144089-1 is cataloged in the U.S. Government catalog under NSN 5340-00-704-0775. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2144089-1