214114: HOSE ASSEMBLY,NONMETALLIC.
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include vacuum_in_torr: 508.0, connection_type: INTERNAL QUICK DISCONNECT FIRST END, inside_diameter: 4.000 INCHES NOMINAL IN, connection_style: CAM OR LEVER (INTERNAL) FIRST END, special_features: INNER CONVEYING TUBE MATERIAL-RUBBER, BUNA-N, operating_pressure: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS. This part is cataloged in the U.S.
Government catalog under NSN 5305-00-346-4776, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| vacuum_in_torr | 508.0 |
| connection_type | INTERNAL QUICK DISCONNECT FIRST END |
| inside_diameter | 4.000 INCHES NOMINAL IN |
| connection_style | CAM OR LEVER (INTERNAL) FIRST END |
| special_features | INNER CONVEYING TUBE MATERIAL-RUBBER, BUNA-N |
| operating_pressure | 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| burst_test_pressure | 500.0 POUNDS PER SQUARE INCH LBS |
| end_connection_design | STRAIGHT SECOND END |
| inside_surface_condition | SMOOTH |
| hydrostatic_test_pressure | 300.0 POUNDS PER SQUARE INCH LBS |
| cross-sectional_shape_style | ROUND |
| measuring_method_and_length | 594.000 INCHES MINIMUM OVERALL AND 606.000 INCHES MAXIMUM OVERALL IN |
| NSN | 5305-00-346-4776 |
| POINT DIAMETER | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| WIDTH ACROSS FLATS | 0.156 INCHES NOMINAL IN |
| POINT LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.675 INCHES MINIMUM AND 0.695 INCHES MAXIMUM IN |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD LENGTH | 0.415 INCHES MINIMUM AND 0.455 INCHES MAXIMUM IN |
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | COMP 16-18 ASSN STD 5TH MATERIAL RESPONSE OVERALL |
| POINT CHAMFER ANGLE | 80.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| NOMINAL THREAD DIAMETER | 0.312 INCHES IN |
No substitute or cross-reference records for this part.