PartsTable
Technical Data Sheet
214-8-1 ✓ Verified by PartsTable
Trust · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

Wireless optical mouse<br>- 6m wireless range<br>- Speed select button 1000-1600 DPI<br>- Storable USB micro receiver<br>- On/off power switch<br>- For left and right hand use. Key specifications include material: STEEL OVERALL, design_type: WHIP SINGLE ANTENNA ELEMENT, input_phase: SINGLE SINGLE OPERATING POWER RQMT, overall_width: 2.750 INCHES NOMINAL IN, overall_height: 3.750 INCHES NOMINAL IN, overall_length: 4.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-419-1953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 214-8-1
NSN: 5999-00-419-1953
FSC: 5999
CAGE: 15605 — EATON CORP OPNS & TECHNICAL CENTER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
design_typeWHIP SINGLE ANTENNA ELEMENT
input_phaseSINGLE SINGLE OPERATING POWER RQMT
overall_width2.750 INCHES NOMINAL IN
overall_height3.750 INCHES NOMINAL IN
overall_length4.750 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
frequency_rating30.0 MEGAHERTZ MINIMUM AND 512.0 MEGAHERTZ MAXIMUM SINGLE ANTENNA ELEMENT
section_quantity1
special_featuresBASE TEMPERATURE RATING MINUS 20 DEG C TO 71 DEG C,ALTITUDE RATING SEA LEVEL TO INFINITY DEGC
features_providedFILTER
output_control_typeVOLTAGE ADJUSTMENT SINGLE POWER OUTPUT
NSN5999-00-419-1953
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 214-8-1 MFR Trust RESISTOR,VARIABLE,WIRE WOUND,NON
KEY FEATURES
MOUNTING METHOD: UNTHREADED HOLE(S)
MATERIAL: COPPER BODY
UNTHREADED MOUNTING HOLE DIAMETER: 0.250 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 1.000 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHODUNTHREADED HOLE(S)
MATERIALCOPPER BODY
UNTHREADED MOUNTING HOLE DIAMETER0.250 INCHES NOMINAL IN
MATERIALCOPPER CONTACT
DISTANCE BETWEEN MOUNTING FACILITY CENTERS1.000 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
MOUNTING METHODUNTHREADED HOLE(S)
MATERIALCOPPER BODY
UNTHREADED MOUNTING HOLE DIAMETER0.250 INCHES NOMINAL IN
MATERIALCOPPER CONTACT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
2148-1Interchangeable
interchangeable cross-reference
interchangeable
M7560/1-13Interchangeable
interchangeable cross-reference
interchangeable
1280Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-7560/1Interchangeable
interchangeable cross-reference
interchangeable
VIDS-55.2AInterchangeable
interchangeable cross-reference
interchangeable
V1DS-55.2AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 214-8-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214-8-1?
214-8-1 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Trust. It is classified as a MRO (MRO_GENERAL).
What parts can replace 214-8-1?
There are 9 known substitutes for 214-8-1: 2148-1, M7560/1-13, 1280 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 214-8-1?
214-8-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-419-1953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214-8-1