PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 214-1025P2
214-1025P2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOOK,SUPPORT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, material_width: 0.438 INCHES NOMINAL IN, overall_height: 0.344 INCHES NOMINAL IN, surface_treatment: PASSIVATE, material_thickness: 0.125 INCHES NOMINAL IN, mounting_hole_diameter: 0.182 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-544-3620, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214-1025P2
NSN: 5340-00-544-3620
FSC: 5340
CAGE: 99687 — RAYTHEON CO EQUIPMENT DEVELOPMENT LAB (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
material_width0.438 INCHES NOMINAL IN
overall_height0.344 INCHES NOMINAL IN
surface_treatmentPASSIVATE
material_thickness0.125 INCHES NOMINAL IN
mounting_hole_diameter0.182 INCHES NOMINAL IN
mounting_hole_quantity2
overall_length_from_mounting_surface1.109 INCHES NOMINAL IN
NSN5340-00-544-3620
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 214-1025P2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
MOUNTING HOLE DIAMETER: 0.182 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING
•
SURFACE TREATMENT: PASSIVATE
•
MATERIAL WIDTH: 0.438 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
OVERALL LENGTH FROM MOUNTING SURFACE: 1.109 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE QUANTITY2
MOUNTING HOLE DIAMETER0.182 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING
SURFACE TREATMENTPASSIVATE
MATERIAL WIDTH0.438 INCHES NOMINAL IN
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
OVERALL LENGTH FROM MOUNTING SURFACE1.109 INCHES NOMINAL IN
OVERALL HEIGHT0.344 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
26038Interchangeable
interchangeable cross-reference
interchangeable
57307R2Interchangeable
interchangeable cross-reference
interchangeable
N18-03Interchangeable
interchangeable cross-reference
interchangeable
1863160Interchangeable
interchangeable cross-reference
interchangeable
14G592Interchangeable
interchangeable cross-reference
interchangeable
203244Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 214-1025P2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214-1025P2?
214-1025P2 is a HOOK,SUPPORT.
What parts can replace 214-1025P2?
There are 20 known substitutes for 214-1025P2: 26038, 57307R2, N18-03 and 17 more. Substitute compatibility should be verified for your specific system.
Is 214-1025P2 still available?
214-1025P2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214-1025P2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026