PartsTable
Technical Data Sheet
Download PDF

214-010-856-103 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

214-010-856-103: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 INNER RING, bore_diameter: 0.6690 INCHES MINIMUM AND 0.6693 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES NOMINAL, overall_width: 0.9249 INCHES MINIMUM AND 0.9449 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-265-9042, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214-010-856-103
NSN: 3110-01-265-9042
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 INNER RING
bore_diameter0.6690 INCHES MINIMUM AND 0.6693 INCHES MAXIMUM IN
contact_angle25.0 DEGREES NOMINAL
overall_width0.9249 INCHES MINIMUM AND 0.9449 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
special_features100 PCT FULL SPECIFIED LUBRICANT
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
bearing_preload_rating5.5 POUNDS NOMINAL LBS
overall_outside_diameter1.5743 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM IN
bearing_preload_designationLIGHT
retainer_fabrication_methodMACHINED
NSN3110-01-265-9042
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 214-010-856-103 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
BEARING PRELOAD RATING: 5.5 POUNDS NOMINAL LBS
•
SURFACE FINISH: GROUND
•
BEARING PRELOAD DESIGNATION: LIGHT
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
•
OVERALL OUTSIDE DIAMETER: 1.5743 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM IN
•
CONTACT ANGLE: 25.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
BEARING PRELOAD RATING5.5 POUNDS NOMINAL LBS
SURFACE FINISHGROUND
BEARING PRELOAD DESIGNATIONLIGHT
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
OVERALL WIDTH0.9249 INCHES MINIMUM AND 0.9449 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.5743 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM IN
CONTACT ANGLE25.0 DEGREES NOMINAL
LOAD DIRECTIONANGULAR
SPECIAL FEATURES100 PCT FULL SPECIFIED LUBRICANT
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
7203D4FReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 214-010-856-103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214-010-856-103?
214-010-856-103 is a BEARING,BALL,DUPLEX.
What parts can replace 214-010-856-103?
There is 1 known substitute for 214-010-856-103: 7203D4F. Substitute compatibility should be verified for your specific system.
What is the NSN for 214-010-856-103?
214-010-856-103 is cataloged in the U.S. Government catalog under NSN 3110-01-265-9042. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214-010-856-103

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.