213A618 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

213A618: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_width: 0.630 INCHES NOMINAL IN, body_height: 0.610 INCHES NOMINAL IN, body_length: 1.968 INCHES NOMINAL IN, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCASED, style_designator: AXIAL TERMINAL (S). This part is cataloged in the U.S.

Government catalog under NSN 5905-01-467-3617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 213A618

NSN: 5905-01-467-3617
FSC: 5905 — Resistor
CAGE: 52088 — LOCKHEED MARTIN CORPORATION DIV RMS - MANASSAS (USA)

SPECIFICATIONS

body_width	0.630 INCHES NOMINAL IN
body_height	0.610 INCHES NOMINAL IN
body_length	1.968 INCHES NOMINAL IN
terminal_type	TAB, SOLDER LUG
inclosure_type	ENCASED
style_designator	AXIAL TERMINAL (S)
mounting_hole_size	0.125 INCHES NOMINAL IN
electrical_resistance	470.000 OHMS
reliability_indicator	NOT ESTABLISHED
end_item_identification	SIU UNIT 4010 LOS ANGELES CLASS SSN (688)
resistance_tolerance_in_percent	-3.000 TO 3.000
ambient_temp_at_full_rated_power	25.0 CELSIUS DEGC
NSN	5905-01-467-3617

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -3.000 TO 3.000

•

ELECTRICAL RESISTANCE: 470.000 OHMS

•

INCLOSURE TYPE: ENCASED

•

MOUNTING HOLE SIZE: 0.125 INCHES NOMINAL IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 1.562 INCHES NOMINAL IN

•

BODY WIDTH: 0.630 INCHES NOMINAL IN

•

BODY HEIGHT: 0.610 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-3.000 TO 3.000
ELECTRICAL RESISTANCE	470.000 OHMS
INCLOSURE TYPE	ENCASED
MOUNTING HOLE SIZE	0.125 INCHES NOMINAL IN
TERMINAL TYPE	TAB, SOLDER LUG
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	1.562 INCHES NOMINAL IN
BODY WIDTH	0.630 INCHES NOMINAL IN
BODY HEIGHT	0.610 INCHES NOMINAL IN
STYLE DESIGNATOR	AXIAL TERMINAL (S)
POWER DISSIPATION RATING IN WATTS	50.000 FREE AIR

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 2

RH50-470OHM50WSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

RH50 470OHM 1% 50WReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 213A618?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 213A618?

213A618 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace 213A618?

There are 2 known substitutes for 213A618: RH50-470OHM50W, RH50 470OHM 1% 50W. Substitute compatibility should be verified for your specific system.

What is the NSN for 213A618?

213A618 is cataloged in the U.S. Government catalog under NSN 5905-01-467-3617. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

213A618 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — 213A618