PartsTable
Technical Data Sheet
Download PDF

2137-3D101 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

2137-3D101: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -20.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.401 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN, connection_style: SWIVEL NUT FLARE FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-018-6617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2137-3D101
NSN: 4720-00-018-6617
NIINs: 000186617, 010257862
FSC: 4720 — Hose and Flexible Tubing
CAGE: 51005 — VITOK ENGINEERS INC (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-20.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.401 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.875 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
special_features2 ADAPTERS,NO. 0503
thread_directionRIGHT-HAND FIRST END
features_providedREUSABLE END FITTINGS
operating_pressure500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure2000.0 POUNDS PER SQUARE INCH LBS
NSN4720-00-018-6617
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 2137-3D101 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 6
PV1612-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
B44X4X 3/4 X 1.000Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
SM-A-886914Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
K010-1216X100Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2137-3D101-H-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B-44-4XReference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2137-3D101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2137-3D101?
2137-3D101 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 2137-3D101?
There are 6 known substitutes for 2137-3D101: PV1612-1, B44X4X 3/4 X 1.000, SM-A-886914 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2137-3D101?
2137-3D101 is cataloged in the U.S. Government catalog under NSN 4720-00-018-6617. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2137-3D101