PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2133D
2133D ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: ALUMINUM ALLOY 2017 OVERALL, nut_style: HOSE COUPLING, nut_height: 0.562 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNS, thread_direction: RIGHT-HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0641, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2133D
NSN: 3110-00-100-0641
FSC: 3110
CAGE: 02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2017 OVERALL
nut_styleHOSE COUPLING
nut_height0.562 INCHES NOMINAL IN
thread_class2B
thread_seriesUNS
thread_directionRIGHT-HAND
hose_nominal_size0.188 INCHES IN
surface_treatmentANODIZE OVERALL
nominal_thread_size0.234 INCHES IN
largest_outside_diameter0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
smallest_inside_diameter0.313 INCHES NOMINAL IN
thread_quantity_per_inch32
NSN3110-00-100-0641
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2133D · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.9380 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.6875 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
OUTSIDE DIAMETER1.9380 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
209984Interchangeable
interchangeable cross-reference
interchangeable
177004-14Interchangeable
interchangeable cross-reference
interchangeable
23005Interchangeable
interchangeable cross-reference
interchangeable
MS51957-06Interchangeable
interchangeable cross-reference
interchangeable
702002-181Interchangeable
interchangeable cross-reference
interchangeable
SWX12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2133D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2133D?
2133D is a BEARING,ROLLER,TAPERED.
What parts can replace 2133D?
There are 30 known substitutes for 2133D: 209984, 177004-14, 23005 and 27 more. Substitute compatibility should be verified for your specific system.
Is 2133D still available?
2133D is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2133D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026