PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 213-615
213-615 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 1211 OVERALL, tongue_width: 0.594 INCHES NOMINAL IN, tongue_thickness: 0.334 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN, shank_outside_diameter: 0.312 INCHES NOMINAL IN, distance_from_end_to_hole_center: 1.375 INCHES NOMINAL IN, material_document_and_classification: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-021-3615, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
213-615
NSN: 5305-00-021-3615
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1211 OVERALL
tongue_width0.594 INCHES NOMINAL IN
tongue_thickness0.334 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
shank_outside_diameter0.312 INCHES NOMINAL IN
distance_from_end_to_hole_center1.375 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5305-00-021-3615
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 213-615 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
•
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD CLASS: 2A A
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS2A A
SURFACE TREATMENTPASSIVATE OVERALL
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.500 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
213-23Interchangeable
interchangeable cross-reference
interchangeable
213-615Interchangeable
interchangeable cross-reference
interchangeable
D11076-5-36Interchangeable
Same NIIN cross-reference
interchangeable
419-384Interchangeable
Same NIIN cross-reference
interchangeable
8599267-395Interchangeable
Same NIIN cross-reference
interchangeable
FFS85TYPE2STYLE10PInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 213-615?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 213-615?
213-615 is a CONNECTOR,ROD END.
What parts can replace 213-615?
There are 7 known substitutes for 213-615: 213-23, 213-615, D11076-5-36 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 213-615?
213-615 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-021-3615. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 213-615

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026