PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 213-54G15
213-54G15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.016 INCHES NOMINAL IN, loop_inside_diameter: 1.250 INCHES NOMINAL IN, fastening_device_type: LOCK TAB. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-663-1978, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
213-54G15
NSN: 5340-00-663-1978
FSC: 5340
CAGE: 58880 — MEGGITT (NEW HAMPSHIRE), INC (USA)
SPECIFICATIONS
materialSTEEL BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.016 INCHES NOMINAL IN
loop_inside_diameter1.250 INCHES NOMINAL IN
fastening_device_typeLOCK TAB
NSN5340-00-663-1978
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 213-54G15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
FASTENING DEVICE TYPE: LOCK TAB
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BAND
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.250 INCHES NOMINAL IN
MATERIALRUBBER CUSHION
FASTENING DEVICE TYPELOCK TAB
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
7408053P2Interchangeable
interchangeable cross-reference
interchangeable
M-7473192-2Interchangeable
interchangeable cross-reference
interchangeable
18723Interchangeable
interchangeable cross-reference
interchangeable
H543-9Interchangeable
interchangeable cross-reference
interchangeable
10182010-026Interchangeable
interchangeable cross-reference
interchangeable
1123-9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 213-54G15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 213-54G15?
213-54G15 is a CLAMP,LOOP.
What parts can replace 213-54G15?
There are 7 known substitutes for 213-54G15: 7408053P2, M-7473192-2, 18723 and 4 more. Substitute compatibility should be verified for your specific system.
Is 213-54G15 still available?
213-54G15 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 213-54G15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026