PartsTable
Technical Data Sheet
Download PDF

213-3D — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

213-3D: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: ALUMINUM ALLOY 2017 OVERALL, nut_style: HOSE COUPLING, nut_height: 0.562 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNS, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0641, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
213-3D
NSN: 3110-00-100-0641
NIINs: 001000641, 001557460, 010814687
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2017 OVERALL
nut_styleHOSE COUPLING
nut_height0.562 INCHES NOMINAL IN
thread_class2B
thread_seriesUNS
thread_directionRIGHT-HAND
hose_nominal_size0.188 INCHES IN
surface_treatmentANODIZE OVERALL
nominal_thread_size0.234 INCHES IN
largest_outside_diameter0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
smallest_inside_diameter0.313 INCHES NOMINAL IN
thread_quantity_per_inch32
NSN3110-00-100-0641
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 213-3D · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 1.9380 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH0.6875 INCHES NOMINAL IN
OUTSIDE DIAMETER1.9380 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
09196Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-B-187/01Reference document
Same NSN cross-reference
Reference document — Secondary reference
63382Reference document
Same NSN cross-reference
Reference document — Secondary reference
70004Reference document
Same NSN cross-reference
Reference document — Secondary reference
0209984-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
164259Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 213-3D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 213-3D?
213-3D is a BEARING,ROLLER,TAPERED.
What parts can replace 213-3D?
There are 7 known substitutes for 213-3D: 09196, FF-B-187/01, 63382 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 213-3D?
213-3D is cataloged in the U.S. Government catalog under NSN 3110-00-100-0641. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 213-3D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.