PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 213-257
213-257 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CONTROL ASSEMBLY,PUSH-PULL is a the manufacturer industrial component. Key specifications include end_item_identification: 3830-01-585-6695 WINCH,ATTACHMENT, part_name_assigned_by_controlling_agency: STRAP, TIE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-012-4949, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
213-257
NSN: 5310-00-012-4949
FSC: 5310
CAGE: 06853 — BENDIX COMMERCIAL VEHICLE SYSTEMS LLC DBA BENDIX COMMERCIAL VEHICLE SYSTEMS (USA)
SPECIFICATIONS
end_item_identification3830-01-585-6695 WINCH,ATTACHMENT
part_name_assigned_by_controlling_agencySTRAP, TIE
NSN5310-00-012-4949
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 213-257 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 16
•
THREAD SERIES: UNF
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
THREAD CLASS: 2B
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH16
THREAD SERIESUNF
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
NOMINAL THREAD SIZE0.750 INCHES IN
THREAD CLASS2B
NONDEFINITIVE SPEC/STD DATAA TYPE
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL OVERALL
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY OVER-ALL HEIGHT
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
0369-01-4Interchangeable
interchangeable cross-reference
interchangeable
211043Interchangeable
interchangeable cross-reference
interchangeable
11043Interchangeable
interchangeable cross-reference
interchangeable
211043PT6Interchangeable
interchangeable cross-reference
interchangeable
64-032-42INInterchangeable
interchangeable cross-reference
interchangeable
64-032-610Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 213-257?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 213-257?
213-257 is a CONTROL ASSEMBLY,PUSH-PULL.
What parts can replace 213-257?
There are 15 known substitutes for 213-257: 0369-01-4, 211043, 11043 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 213-257?
213-257 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-012-4949. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 213-257

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026