PartsTable
Technical Data Sheet
PartsTable / MRO / 213-0-001
213-0-001 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: COPPER ALLOY OVERALL, body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.875 INCHES NOMINAL IN, flat_height: 0.142 INCHES NOMINAL IN, shaft_style: ROUND, shaft_length: 1.125 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6155, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 213-0-001
NSN: 3110-00-100-6155
FSC: 3110
CAGE: 37917 — CROSBY VALVE LTD (CAN)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.875 INCHES NOMINAL IN
flat_height0.142 INCHES NOMINAL IN
shaft_styleROUND
shaft_length1.125 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
actuator_typeDUAL CONCENTRIC
body_diameter0.890 INCHES NOMINAL IN
overall_length2.437 INCHES NOMINAL IN
shaft_diameter0.187 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
connection_typeTHREADED EXTERNAL PIPE FIRST END
mounting_methodSTANDARD BUSHING
NSN3110-00-100-6155
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 213-0-001 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROLLING ELEMENT DIAMETER: 0.3750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BALL
•
MATERIAL: STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66,AISI/SAE E50100 FED STD 1ST MATERIAL RESPONSE OR 66,AISI/SAE E51100 FED STD 2ND MATERIAL RESPONSE OR 66,AISI/SAE E52100 FED STD 3RD MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESAFBMA STANDARD TOLERANCE FOR BALLS,GRADE 24
ROLLING ELEMENT DIAMETER0.3750 INCHES NOMINAL IN
STYLE DESIGNATORBALL
MATERIALSTEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66,AISI/SAE E50100 FED STD 1ST MATERIAL RESPONSE OR 66,AISI/SAE E51100 FED STD 2ND MATERIAL RESPONSE OR 66,AISI/SAE E52100 FED STD 3RD MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
20388Interchangeable
interchangeable cross-reference
interchangeable
2121885Interchangeable
interchangeable cross-reference
interchangeable
050-004Interchangeable
interchangeable cross-reference
interchangeable
945827Interchangeable
interchangeable cross-reference
interchangeable
25501-5SInterchangeable
interchangeable cross-reference
interchangeable
7017Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 213-0-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 213-0-001?
213-0-001 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 213-0-001?
There are 27 known substitutes for 213-0-001: 20388, 2121885, 050-004 and 24 more. Substitute compatibility should be verified for your specific system.
Is 213-0-001 still available?
213-0-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 213-0-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026