PartsTable
Technical Data Sheet
Download PDF

2124763-1 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2124763-1: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include angle: 78.0 DEGREES NOMINAL, material: RUBBER CHLOROPRENE CLASS CR OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 9.106 INCHES MINIMUM AND 9.126 INCHES MAXIMUM IN, center_hole_diameter: 8.656 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-809-5885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2124763-1
NSN: 5330-00-809-5885
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
angle78.0 DEGREES NOMINAL
materialRUBBER CHLOROPRENE CLASS CR OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter9.106 INCHES MINIMUM AND 9.126 INCHES MAXIMUM IN
center_hole_diameter8.656 INCHES NOMINAL IN
cross-sectional_height0.332 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
cross-sectional_shape_styleANGLE
material_document_and_classificationASTM D2000 2BC620 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-809-5885
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2124763-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.332 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BC620 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE
•
ANGLE: 78.0 DEGREES NOMINAL
•
PERIPHERAL DIAMETER: 9.106 INCHES MINIMUM AND 9.126 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 8.656 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.332 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BC620 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEANGLE
ANGLE78.0 DEGREES NOMINAL
PERIPHERAL DIAMETER9.106 INCHES MINIMUM AND 9.126 INCHES MAXIMUM IN
CENTER HOLE DIAMETER8.656 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2124763-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2124763-1?
2124763-1 is a PACKING,PREFORMED.
What is the NSN for 2124763-1?
2124763-1 is cataloged in the U.S. Government catalog under NSN 5330-00-809-5885. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2124763-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.