PartsTable
Technical Data Sheet
Download PDF

2123532-24 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2123532-24: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: COTTON AND PLASTIC POLYAMIDE NYLON AND RUBBER NATURAL OVERALL, hole_diameter: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.000 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN, overall_length: 2.000 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-149-0873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2123532-24
NSN: 5330-01-149-0873
FSC: 5330 — Packing and Gasket Materials
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialCOTTON AND PLASTIC POLYAMIDE NYLON AND RUBBER NATURAL OVERALL
hole_diameter0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.000 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
overall_length2.000 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
aperture_diameter1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN
bolt_hole_quantity4
outside_corner_radius0.125 INCHES NOMINAL IN
cross-sectional_thickness0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
cross-sectional_shape_styleCLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
outside_edge_to_bolt_hole_center_distance_along_width0.219 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.219 INCHES NOMINAL IN
NSN5330-01-149-0873
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2123532-24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: CLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
•
APERTURE DIAMETER: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH2.000 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLECLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
OVERALL WIDTH2.000 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
APERTURE DIAMETER1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.219 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
5330PL0894081Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2123532-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2123532-24?
2123532-24 is a GASKET.
What parts can replace 2123532-24?
There is 1 known substitute for 2123532-24: 5330PL0894081. Substitute compatibility should be verified for your specific system.
What is the NSN for 2123532-24?
2123532-24 is cataloged in the U.S. Government catalog under NSN 5330-01-149-0873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2123532-24

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.