2123298-4 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

2123298-4: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT, body_diameter: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-892-7102, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 2123298-4

NSN: 5905-00-892-7102
FSC: 5905 — Resistor
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
shaft_length	0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
body_diameter	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
shaft_diameter	0.1245 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
mounting_method	STANDARD BUSHING
section_quantity	1
terminal_location	REAR END LOCATION NOT OTHERWISE SPECIFIED
nonturn_device_radius	0.188 INCHES NOMINAL IN
reliability_indicator	NOT ESTABLISHED
NSN	5905-00-892-7102

COMPONENT DIAGRAM

KEY FEATURES

•

NONTURN DEVICE LOCATION: AT 6 OCLOCK

•

BODY DIAMETER: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 1.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 135.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.1245 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN

•

NONTURN DEVICE RADIUS: 0.188 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

NONTURN DEVICE LOCATION	AT 6 OCLOCK
BODY DIAMETER	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	1.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	135.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.1245 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
NONTURN DEVICE RADIUS	0.188 INCHES NOMINAL IN
FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR
BODY STYLE	CYLINDRICAL BUSHING MOUNTED

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 2

50M56-4Reference document

Same NSN cross-reference

Reference document — Secondary reference

50-M56-4BSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 2123298-4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2123298-4?

2123298-4 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace 2123298-4?

There are 2 known substitutes for 2123298-4: 50M56-4, 50-M56-4B. Substitute compatibility should be verified for your specific system.

What is the NSN for 2123298-4?

2123298-4 is cataloged in the U.S. Government catalog under NSN 5905-00-892-7102. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2123298-4 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — 2123298-4