PartsTable / COMPONENT / 2123186
2123186
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: PLASTIC ACRYLIC OR LEATHER SEALING ELEMENT, case_style: RECESSED, seal_width: 0.438 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN, temp_rating: -65.0 CELSIUS AND 300.0 CELSIUS DEGC, outside_diameter: 4.254 INCHES NOMINAL IN, attachment_method: CEMENTED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-889-5778, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2123186
NSN: 5330-00-889-5778 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material PLASTIC ACRYLIC OR LEATHER SEALING ELEMENT case_style RECESSED seal_width 0.438 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN temp_rating -65.0 CELSIUS AND 300.0 CELSIUS DEGC outside_diameter 4.254 INCHES NOMINAL IN attachment_method CEMENTED surface_treatment PLASTIC CASE housing_bore_diameter 4.249 INCHES NOMINAL IN sealing_element_style VERTICAL accommodated_shaft_diameter 3.000 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-889-5778
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 2123186
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
• HOUSING BORE DIAMETER: 4.249 INCHES NOMINAL IN
• OUTSIDE DIAMETER: 4.254 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: VERTICAL
• SURFACE TREATMENT: PLASTIC CASE
• TEMP RATING: -65.0 CELSIUS AND 300.0 CELSIUS DEGC
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH 0.438 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN HOUSING BORE DIAMETER 4.249 INCHES NOMINAL IN CASE STYLE RECESSED OUTSIDE DIAMETER 4.254 INCHES NOMINAL IN SEALING ELEMENT STYLE VERTICAL SURFACE TREATMENT PLASTIC CASE TEMP RATING -65.0 CELSIUS AND 300.0 CELSIUS DEGC ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT MATERIAL PLASTIC ACRYLIC OR LEATHER SEALING ELEMENT ATTACHMENT METHOD CEMENTED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
30055 Interchangeable interchangeable cross-reference
interchangeable
138017 Interchangeable interchangeable cross-reference
interchangeable
12805A Interchangeable interchangeable cross-reference
interchangeable
827441 Interchangeable interchangeable cross-reference
interchangeable
17-04617-5 Interchangeable interchangeable cross-reference
interchangeable
17-04617-1 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 2123186?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2123186?
2123186 is a SEAL,PLAIN ENCASED.
What parts can replace 2123186?
There are 23 known substitutes for 2123186: 30055, 138017, 12805A and 20 more. Substitute compatibility should be verified for your specific system.
Is 2123186 still available?
2123186 is currently cancelled.
Request a Quote — 2123186