2122704-7 — PIN,GROOVED,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

2122704-7: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, inside_diameter: 0.509 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, outside_diameter: 0.630 INCHES NOMINAL IN, special_features: DIAGONAL CUT 45.0 DEG AND 0.010 IN. MIN AND 0.041 IN.

MAX WIDE THROUGH WALL ON ONE SIDE IN, overall_thickness: 0.056 INCHES MINIMUM AND 0.058 INCHES MAXIMUM IN, material_document_and_classification: MIL-P-17091,TYPE 1-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S. Government catalog under NSN 5315-00-923-5449, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2122704-7

NSN: 5315-00-923-5449
NIINs: 009235449, 011959708
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

material	PLASTIC POLYAMIDE NYLON
inside_diameter	0.509 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
outside_diameter	0.630 INCHES NOMINAL IN
special_features	DIAGONAL CUT 45.0 DEG AND 0.010 IN. MIN AND 0.041 IN. MAX WIDE THROUGH WALL ON ONE SIDE IN
overall_thickness	0.056 INCHES MINIMUM AND 0.058 INCHES MAXIMUM IN
material_document_and_classification	MIL-P-17091,TYPE 1-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE
NSN	5315-00-923-5449

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 32.0 MICROINCHES OUTSIDE DIAMETER

•

UNDERCUT WIDTH: 0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN

•

UNDERCUT DIAMETER: 0.508 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN

•

FIRST END LOCATION: OPPOSITE GROOVED END

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: DOD-P-15232 TY M. CLASS 1 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL

•

FIRST END STYLE: SQUARE W/THRU HOLE

•

HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL

•

STYLE DESIGNATOR: GROOVE

TECHNICAL CHARACTERISTICS

SURFACE FINISH	32.0 MICROINCHES OUTSIDE DIAMETER
UNDERCUT WIDTH	0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
UNDERCUT DIAMETER	0.508 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN
FIRST END LOCATION	OPPOSITE GROOVED END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	DOD-P-15232 TY M. CLASS 1 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLE	SQUARE W/THRU HOLE
HARDNESS RATING	30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATOR	GROOVE
MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER	0.6251 INCHES MINIMUM AND 0.6253 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 3

PL2122700-17Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2122700-176Reference document

Same NSN cross-reference

Reference document — Secondary reference

2122702-176Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 2122704-7?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2122704-7?

2122704-7 is a PIN,GROOVED,HEADLESS.

What parts can replace 2122704-7?

There are 3 known substitutes for 2122704-7: PL2122700-17, 2122700-176, 2122702-176. Substitute compatibility should be verified for your specific system.

What is the NSN for 2122704-7?

2122704-7 is cataloged in the U.S. Government catalog under NSN 5315-00-923-5449. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2122704-7 — PIN,GROOVED,HEADLESS

Request a Quote — 2122704-7