PartsTable
Technical Data Sheet
Download PDF

2122704-2 — SPACER,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2122704-2: SPACER,SLEEVE.

The SPACER,SLEEVE is a the manufacturer industrial component. Key specifications include corner_shape: SQUARE ALL CORNERS, special_features: CUT THRU 0.010 IN. MIN 0.031 IN.

MAX IN, body_outside_diameter: 0.2553 INCHES NOMINAL IN. This part is cataloged in the U.S. Government catalog under NSN 5315-00-923-5416, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2122704-2
NSN: 5315-00-923-5416
NIINs: 009235416, 011475636
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
corner_shapeSQUARE ALL CORNERS
special_featuresCUT THRU 0.010 IN. MIN 0.031 IN. MAX IN
body_outside_diameter0.2553 INCHES NOMINAL IN
NSN5315-00-923-5416
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2122704-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES OUTSIDE DIAMETER
•
UNDERCUT WIDTH: 0.047 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.1729 INCHES MINIMUM AND 0.1739 INCHES MAXIMUM IN
•
FIRST END LOCATION: GROOVED END
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: DOD-P-16232 TY M,CLASS 1 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: SQUARE INTERNALLY THREADED
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: GROOVE
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER
UNDERCUT WIDTH0.047 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.1729 INCHES MINIMUM AND 0.1739 INCHES MAXIMUM IN
FIRST END LOCATIONGROOVED END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONDOD-P-16232 TY M,CLASS 1 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLESQUARE INTERNALLY THREADED
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORGROOVE
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.2501 INCHES MINIMUM AND 0.2503 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
2122702-19Reference document
Same NSN cross-reference
Reference document — Secondary reference
PL2122700-19Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2122700-19Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2122704-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2122704-2?
2122704-2 is a SPACER,SLEEVE.
What parts can replace 2122704-2?
There are 3 known substitutes for 2122704-2: 2122702-19, PL2122700-19, 2122700-19. Substitute compatibility should be verified for your specific system.
What is the NSN for 2122704-2?
2122704-2 is cataloged in the U.S. Government catalog under NSN 5315-00-923-5416. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2122704-2