2122703-6 — STANDOFF,THREADED,SPACING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2122703-6: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 1.000 INCHES NOMINAL IN, diameter: 0.1884 INCHES MINIMUM AND 0.1886 INCHES MAXIMUM IN, groove_width: 0.042 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN, groove_diameter: 0.1185 INCHES MINIMUM AND 0.1195 INCHES MAXIMUM IN, special_features: 0.026 IN. MIN 0.036 IN.

MAX DIA HOLE THROUGH PIN AXIAL CENTER,0.094 IN. TAP DRILL TOO DEPTH SHOWN IN, style_designator: LEFT INTERNAL AND RIGHT INTERNAL THREADS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-923-5342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2122703-6

NSN: 5340-00-923-5342
FSC: 5340 — Hardware, Commercial
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)

SPECIFICATIONS

length	1.000 INCHES NOMINAL IN
diameter	0.1884 INCHES MINIMUM AND 0.1886 INCHES MAXIMUM IN
groove_width	0.042 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
groove_diameter	0.1185 INCHES MINIMUM AND 0.1195 INCHES MAXIMUM IN
special_features	0.026 IN. MIN 0.036 IN. MAX DIA HOLE THROUGH PIN AXIAL CENTER,0.094 IN. TAP DRILL TOO DEPTH SHOWN IN
style_designator	LEFT INTERNAL AND RIGHT INTERNAL THREADS
cross-sectional_shape	ROUND
left_end_chamfer_angle	12.5 DEGREES NOMINAL
right_end_chamfer_angle	12.5 DEGREES NOMINAL
NSN	5340-00-923-5342

COMPONENT DIAGRAM

KEY FEATURES

•

LEFT END CHAMFER ANGLE: 12.5 DEGREES NOMINAL

•

LENGTH: 1.000 INCHES NOMINAL IN

•

GROOVE DIAMETER: 0.1185 INCHES MINIMUM AND 0.1195 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: LEFT INTERNAL AND RIGHT INTERNAL THREADS

•

DIAMETER: 0.1884 INCHES MINIMUM AND 0.1886 INCHES MAXIMUM IN

•

RIGHT END CHAMFER ANGLE: 12.5 DEGREES NOMINAL

•

CROSS-SECTIONAL SHAPE: ROUND

TECHNICAL CHARACTERISTICS

LEFT END CHAMFER ANGLE	12.5 DEGREES NOMINAL
LENGTH	1.000 INCHES NOMINAL IN
GROOVE DIAMETER	0.1185 INCHES MINIMUM AND 0.1195 INCHES MAXIMUM IN
STYLE DESIGNATOR	LEFT INTERNAL AND RIGHT INTERNAL THREADS
DIAMETER	0.1884 INCHES MINIMUM AND 0.1886 INCHES MAXIMUM IN
RIGHT END CHAMFER ANGLE	12.5 DEGREES NOMINAL
CROSS-SECTIONAL SHAPE	ROUND
SPECIAL FEATURES	0.026 IN. MIN 0.036 IN. MAX DIA HOLE THROUGH PIN AXIAL CENTER,0.094 IN. TAP DRILL TOO DEPTH SHOWN IN
GROOVE WIDTH	0.042 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

2122701-6Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

PL2122701-6Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 2122703-6?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2122703-6?

2122703-6 is a STANDOFF,THREADED,SPACING.

What parts can replace 2122703-6?

There are 2 known substitutes for 2122703-6: 2122701-6, PL2122701-6. Substitute compatibility should be verified for your specific system.

What is the NSN for 2122703-6?

2122703-6 is cataloged in the U.S. Government catalog under NSN 5340-00-923-5342. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2122703-6 — STANDOFF,THREADED,SPACING

Request a Quote — 2122703-6