PartsTable
Technical Data Sheet
Download PDF

2122332 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2122332: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include dot_proper_shipping_name: CORROSIVE LIQUID, TOXIC, N.O.S, dot_identification_number: UN2922, part_name_assigned_by_controlling_agency: ALKALINE CYANIDE REAGENT 100ML MDB. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-819-3681, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2122332
NSN: 5330-00-819-3681
NIINs: 008193681, 015041365, 016052217
FSC: 5330 — Packing and Gasket Materials
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
dot_proper_shipping_nameCORROSIVE LIQUID, TOXIC, N.O.S
dot_hazard_class/division8
dot_identification_numberUN2922
part_name_assigned_by_controlling_agencyALKALINE CYANIDE REAGENT 100ML MDB
NSN5330-00-819-3681
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2122332 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.035 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
HARDNESS RATING: 44.0 SHORE DUROMETER A MINIMUM AND 56.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: 9205,GARLOCK INC MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: CLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.035 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
HARDNESS RATING44.0 SHORE DUROMETER A MINIMUM AND 56.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION9205,GARLOCK INC MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH18.374 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
OVERALL WIDTH10.687 INCHES NOMINAL IN
APERTURE WIDTH9.563 INCHES NOMINAL IN
APERTURE LENGTH17.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
BUWEPSDWG2122332Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5330PL0931253Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2122332?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2122332?
2122332 is a GASKET.
What parts can replace 2122332?
There are 2 known substitutes for 2122332: BUWEPSDWG2122332, 5330PL0931253. Substitute compatibility should be verified for your specific system.
What is the NSN for 2122332?
2122332 is cataloged in the U.S. Government catalog under NSN 5330-00-819-3681. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2122332