PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 212-65-934PC5
212-65-934PC5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER SYNTHETIC OVERALL, construction: SOLIDSOLID, overall_length: 8.000 INCHES NOMINAL8.000 INCHES NOMINAL IN, fabrication_method: SOLIDSOLID, cross-sectional_thickness: 0.031 INCHES NOMINAL0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-564-2888, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
212-65-934PC5
NSN: 5330-00-564-2888
FSC: 5330
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
constructionSOLIDSOLID
overall_length8.000 INCHES NOMINAL8.000 INCHES NOMINAL IN
fabrication_methodSOLIDSOLID
cross-sectional_thickness0.031 INCHES NOMINAL0.031 INCHES NOMINAL IN
NSN5330-00-564-2888
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 212-65-934PC5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CONSTRUCTION: SOLIDSOLID
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL0.031 INCHES NOMINAL IN
•
FABRICATION METHOD: SOLIDSOLID
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
CONSTRUCTIONSOLIDSOLID
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL0.031 INCHES NOMINAL IN
FABRICATION METHODSOLIDSOLID
OVERALL LENGTH8.000 INCHES NOMINAL8.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
212081Interchangeable
interchangeable cross-reference
interchangeable
K359-24Interchangeable
interchangeable cross-reference
interchangeable
2081Interchangeable
interchangeable cross-reference
interchangeable
76S2606Interchangeable
interchangeable cross-reference
interchangeable
2S410091Interchangeable
interchangeable cross-reference
interchangeable
D15-769WInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 212-65-934PC5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 212-65-934PC5?
212-65-934PC5 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 212-65-934PC5?
There are 17 known substitutes for 212-65-934PC5: 212081, K359-24, 2081 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 212-65-934PC5?
212-65-934PC5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-564-2888. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 212-65-934PC5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026