PartsTable
Technical Data Sheet
Download PDF

211907 — BEARING,UNIVERSAL L

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

211907: BEARING,UNIVERSAL L.

The BEARING,UNIVERSAL L is a the manufacturer industrial component. Key specifications include material: PLASTIC, design_type: FRICTION, overall_diameter: 0.958 INCHES NOMINAL IN, inside_diameter_length: 0.859 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, connector_nominal_thread_size_for_which_designed: 0.750 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-721-7725, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
211907
NSN: 5340-00-721-7725
NIINs: 007217725, 008767565
FSC: 5340 — Hardware, Commercial
CAGE: 0KDP7 — KIDDE-FENWAL, LLC (USA)
SPECIFICATIONS
materialPLASTIC
design_typeFRICTION
overall_diameter0.958 INCHES NOMINAL IN
inside_diameter_length0.859 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
connector_nominal_thread_size_for_which_designed0.750 INCHES IN
NSN5340-00-721-7725
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 211907 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 0.958 INCHES NOMINAL IN
•
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED: 0.750 INCHES IN
•
MATERIAL: PLASTIC
•
INSIDE DIAMETER LENGTH: 0.859 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER0.958 INCHES NOMINAL IN
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED0.750 INCHES IN
MATERIALPLASTIC
INSIDE DIAMETER LENGTH0.859 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 2
PCB14500000F3Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
PC814500000F3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 211907?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211907?
211907 is a BEARING,UNIVERSAL L.
What parts can replace 211907?
There are 2 known substitutes for 211907: PCB14500000F3, PC814500000F3. Substitute compatibility should be verified for your specific system.
What is the NSN for 211907?
211907 is cataloged in the U.S. Government catalog under NSN 5340-00-721-7725. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211907

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.