PartsTable
Technical Data Sheet
PartsTable / MRO / 211824
211824 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include color: WHITE SINGLE ACTUATOR, material: STEEL OVERALL, body_style: HOLE MOUNT, body_width: 0.625 INCHES NOMINAL IN, cone_width: 0.8750 INCHES NOMINAL IN, body_height: 1.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0220, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 211824
NSN: 3110-00-100-0220
FSC: 3110
CAGE: 25681 — ITT GOULDS PUMPS, INC. (USA)
SPECIFICATIONS
colorWHITE SINGLE ACTUATOR
materialSTEEL OVERALL
body_styleHOLE MOUNT
body_width0.625 INCHES NOMINAL IN
cone_width0.8750 INCHES NOMINAL IN
body_height1.125 INCHES NOMINAL IN
body_length2.875 INCHES NOMINAL IN
thread_class2B
bore_diameter2.0000 INCHES NOMINAL IN
overall_width1.125 INCHES NOMINAL IN
actuator_styleRECTANGULAR
actuator_width0.562 INCHES NOMINAL IN
NSN3110-00-100-0220
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 211824 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 0.8750 INCHES NOMINAL IN
•
BORE DIAMETER: 2.0000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
END ITEM IDENTIFICATIONMRAP BUFFALO MK2A2
SPECIAL FEATURESBERINGS TAPPERED WITH ROLLERS
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH0.8750 INCHES NOMINAL IN
BORE DIAMETER2.0000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
2D16Interchangeable
interchangeable cross-reference
interchangeable
15016Interchangeable
interchangeable cross-reference
interchangeable
149405Interchangeable
interchangeable cross-reference
interchangeable
38050Interchangeable
interchangeable cross-reference
interchangeable
14S1083AInterchangeable
interchangeable cross-reference
interchangeable
15004L-14S-1083AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 211824?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211824?
211824 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 211824?
There are 31 known substitutes for 211824: 2D16, 15016, 149405 and 28 more. Substitute compatibility should be verified for your specific system.
Is 211824 still available?
211824 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211824

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026