PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 211596
211596 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL, overall_length: 0.370 INCHES NOMINAL IN, style_designator: STEPPED SPACER, body_outside_diameter: 3.200 INCHES MAXIMUM IN, first_right_step_width: 0.095 INCHES NOMINAL IN, first_left_counterbore_depth: 0.172 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0780, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
211596
NSN: 3110-00-100-0780
FSC: 3110
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
materialSTEEL
overall_length0.370 INCHES NOMINAL IN
style_designatorSTEPPED SPACER
body_outside_diameter3.200 INCHES MAXIMUM IN
first_right_step_width0.095 INCHES NOMINAL IN
first_left_counterbore_depth0.172 INCHES NOMINAL IN
first_right_step_outside_diameter2.880 INCHES MAXIMUM IN
material_document_and_classificationAISI 4140 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 4142 ASSN STD SINGLE MATERIAL RESPONSE
first_left_counterbore_inside_diameter2.920 INCHES MAXIMUM IN
NSN3110-00-100-0780
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 211596 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
CONE WIDTH: 1.2160 INCHES NOMINAL IN
•
BORE DIAMETER: 1.7500 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
CONE WIDTH1.2160 INCHES NOMINAL IN
BORE DIAMETER1.7500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
D15-518VPC162-164Interchangeable
interchangeable cross-reference
interchangeable
D15-518GPC162-164Interchangeable
interchangeable cross-reference
interchangeable
87506Interchangeable
interchangeable cross-reference
interchangeable
FFB171Interchangeable
interchangeable cross-reference
interchangeable
1R5Interchangeable
interchangeable cross-reference
interchangeable
MILE1TYPE1R5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 211596?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211596?
211596 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 211596?
There are 19 known substitutes for 211596: D15-518VPC162-164, D15-518GPC162-164, 87506 and 16 more. Substitute compatibility should be verified for your specific system.
Is 211596 still available?
211596 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211596

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026