PartsTable
Technical Data Sheet
PartsTable / MRO / 211590

211590 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: PLASTIC POLYPROPYLENE OVERALL, duty_type: CONTINUOUS, nominal_width: 2.000 INCHES IN, nominal_length: 110.0 YARDS, overall_length: 4.245 INCHES NOMINAL IN, surface_luster: GLOSS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-100-3118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 211590
NSN: 3110-00-100-3118
FSC: 3110
CAGE: 25681 — ITT GOULDS PUMPS, INC. (USA)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE OVERALL
duty_typeCONTINUOUS
coil_quantity1
nominal_width2.000 INCHES IN
nominal_length110.0 YARDS
overall_length4.245 INCHES NOMINAL IN
surface_lusterGLOSS
overall_diameter2.020 INCHES NOMINAL IN
winding_quantity1
adhesive_locationONE SIDE
frequency_in_hertz60.0 NOMINAL
fsc_application_dataTELETYPE AND FACSIMILE EQUIPMENT
NSN3110-00-100-3118
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 211590 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
X3336InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS35295-71InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
186282InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3779InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
03779InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3779C001InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 211590?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211590?
211590 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 211590?
There are 19 known substitutes for 211590: X3336, MS35295-71, 186282 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 211590?
211590 is cataloged in the Federal Logistics Information System under NSN 3110-00-100-3118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211590

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026