PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 211587
211587 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL ROLLER, bore_shape: STRAIGHT, bore_diameter: 35.0 MILLIMETERS NOMINAL MM, overall_width: 17.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, locating_feature: NONLOCATING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0774, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
211587
NSN: 3110-00-100-0774
FSC: 3110
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
materialSTEEL ROLLER
bore_shapeSTRAIGHT
bore_diameter35.0 MILLIMETERS NOMINAL MM
overall_width17.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
locating_featureNONLOCATING
special_featuresRADII 0.0400 IN. TO 0.0550 IN. ON ALL BORE AND OD CORNERS,SELECTED,CLASSIFIED AND TESTED BY THE ASSEMBLY MFR AT HIS PLANT IN
style_designatorSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
overall_outside_diameter72.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
standard_tolerance_designationRBEC NO.1
NSN3110-00-100-0774
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 211587 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.1721 INCHES NOMINAL IN
•
BORE DIAMETER: 1.3750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.1721 INCHES NOMINAL IN
BORE DIAMETER1.3750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
3478Interchangeable
interchangeable cross-reference
interchangeable
211587Interchangeable
interchangeable cross-reference
interchangeable
BM67Interchangeable
interchangeable cross-reference
interchangeable
90255Interchangeable
interchangeable cross-reference
interchangeable
K-3478Interchangeable
interchangeable cross-reference
interchangeable
GA52777Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 211587?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211587?
211587 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace 211587?
There are 14 known substitutes for 211587: 3478, 211587, BM67 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 211587?
211587 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0774. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211587

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026