PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 211510

211510 — Technical Data Sheet

✓ Verified by PartsTable
Corolle · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SHOE,ALIGNMENT is a Corolle industrial component. Key specifications include head_style: HEXAGON, head_height: 0.238 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 1.000 INCHES NOMINAL IN, screw_material: STEEL. This part is cataloged in the Federal Logistics Information System under NSN 5305-00-010-8647, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
211510
NSN: 5305-00-010-8647
FSC: 5305
CAGE: 66935 — JOHNSON CONTROLS NAVY SYSTEMS, LLC (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.238 INCHES NOMINAL IN
thread_class2A A
head_diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length1.000 INCHES NOMINAL IN
screw_materialSTEEL
fastener_length2.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.557 INCHES NOMINAL IN
internal_drive_styleSLOT
nominal_thread_diameter0.375 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE
NSN5305-00-010-8647
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 211510 · Corolle ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 1.000 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GRADE 5 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL
•
THREAD QUANTITY PER INCH: 16
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2A A
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
THREAD LENGTH1.000 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GRADE 5 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL
THREAD QUANTITY PER INCH16
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A A
HEAD STYLEHEXAGON
HEAD HEIGHT0.238 INCHES NOMINAL IN
FASTENER LENGTH2.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
100-7S6-6InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
852661InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
152D5030-3InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5305PL1334883InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusMATURE
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 211510?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211510?
211510 is a SHOE,ALIGNMENT manufactured by Corolle.
What parts can replace 211510?
There are 4 known substitutes for 211510: 100-7S6-6, 852661, 152D5030-3 and 1 more. Substitute compatibility should be verified for your specific system.
Is 211510 still available?
211510 is currently MATURE.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211510

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026