2112-6-9-6 — STUD,SHOULDERED

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

2112-6-9-6: STUD,SHOULDERED.

The STUD,SHOULDERED is a the manufacturer industrial component. Key specifications include thread_class: 3A STUD THREAD A, thread_length: 0.325 INCHES MINIMUM NUT THREAD IN, overall_length: 1.331 INCHES NOMINAL IN, shoulder_length: 0.069 INCHES NOMINAL IN, special_features: HEX 0.080 IN. BY 0.125 IN.

DEEP NUT END IN, thread_direction: RIGHT-HAND NUT THREAD. This part is cataloged in the U.S. Government catalog under NSN 5307-00-930-0049, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2112-6-9-6

NSN: 5307-00-930-0049
FSC: 5307 — Studs
CAGE: 29372 — HOWMET GLOBAL FASTENING SYSTEMS INC. DIV TRIDAIR PRODUCTS (USA)

SPECIFICATIONS

thread_class	3A STUD THREAD A
thread_length	0.325 INCHES MINIMUM NUT THREAD IN
overall_length	1.331 INCHES NOMINAL IN
shoulder_length	0.069 INCHES NOMINAL IN
special_features	HEX 0.080 IN. BY 0.125 IN. DEEP NUT END IN
thread_direction	RIGHT-HAND NUT THREAD
shoulder_diameter	0.335 INCHES NOMINAL IN
surface_treatment	CADMIUM OVERALL
nominal_thread_size	0.190 INCHES NUT THREAD IN
nut_end_shank_length	0.562 INCHES NOMINAL IN
thread_quantity_per_inch	32 STUD THREAD
thread_series_designator	UNIFIED NATIONAL JOINT FINE (UNJF) STUD THREAD
NSN	5307-00-930-0049

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD LENGTH: 0.325 INCHES MINIMUM NUT THREAD IN

•

THREAD DIRECTION: RIGHT-HAND STUD THREAD

•

NOMINAL THREAD SIZE: 0.190 INCHES NUT THREAD IN

TECHNICAL CHARACTERISTICS

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH	0.325 INCHES MINIMUM NUT THREAD IN
THREAD LENGTH	0.359 INCHES MINIMUM STUD THREAD IN
OVERALL LENGTH	1.331 INCHES NOMINAL IN
THREAD DIRECTION	RIGHT-HAND STUD THREAD
THREAD DIRECTION	RIGHT-HAND NUT THREAD
NOMINAL THREAD SIZE	0.190 INCHES NUT THREAD IN
NOMINAL THREAD SIZE	0.190 INCHES STUD THREAD IN
SHOULDER DIAMETER	0.335 INCHES NOMINAL IN
SPECIAL FEATURES	HEX 0.080 IN. BY 0.125 IN. DEEP NUT END IN

OTHER ITEMS IN FSC 5307 — Studs

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5307-00-000-6436 5307-00-001-1578 5307-00-001-1761 5307-00-001-2366 5307-00-001-4491 5307-00-001-4624 5307-00-001-4625

SUBSTITUTES & CROSS-REFERENCES 2

HL160-6-9-6Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

C692-6-9-6Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 2112-6-9-6?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2112-6-9-6?

2112-6-9-6 is a STUD,SHOULDERED.

What parts can replace 2112-6-9-6?

There are 2 known substitutes for 2112-6-9-6: HL160-6-9-6, C692-6-9-6. Substitute compatibility should be verified for your specific system.

What is the NSN for 2112-6-9-6?

2112-6-9-6 is cataloged in the U.S. Government catalog under NSN 5307-00-930-0049. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2112-6-9-6 — STUD,SHOULDERED

Request a Quote — 2112-6-9-6