PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2111-12
2111-12 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The FORK,TURNBUCKLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, point_type: SPLIT, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 4.500 INCHES NOMINAL IN, overall_length: 6.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-8526, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2111-12
NSN: 5310-00-013-8526
FSC: 5310
CAGE: 78189 — ITW SHAKEPROOF AUTOMOTIVE PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeSPLIT
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length4.500 INCHES NOMINAL IN
flute_quantity2
overall_length6.000 INCHES NOMINAL IN
shank_diameter0.500 INCHES NOMINAL IN
handle_clearance1.000 INCHES NOMINAL IN
special_featuresJOBBERS LG; FRACTIONAL SIZE 1/2
cutting_end_styleGENERAL PURPOSE
surface_treatmentOXIDE FILM OVERALL
NSN5310-00-013-8526
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2111-12 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL THICKNESS: 0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIAL THICKNESS0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAA TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
04240ABInterchangeable
interchangeable cross-reference
interchangeable
14942-192Interchangeable
interchangeable cross-reference
interchangeable
13110PC187Interchangeable
interchangeable cross-reference
interchangeable
TC15-1645Interchangeable
interchangeable cross-reference
interchangeable
2111-12Interchangeable
interchangeable cross-reference
interchangeable
61Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2111-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2111-12?
2111-12 is a FORK,TURNBUCKLE.
What parts can replace 2111-12?
There are 16 known substitutes for 2111-12: 04240AB, 14942-192, 13110PC187 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2111-12?
2111-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-8526. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2111-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026