PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 211066607
211066607 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include drive_type: HEX SOCKET OR SCREW SLOT OR SERRATED OR SQUARE HEAD, design_type: THREADED, thread_class: 2A A, overall_diameter: 1.000 INCHES MAXIMUM IN, features_provided: SHOULDER, nondefinitive_spec/std_data: 1 TYPE AND 1 CLASS AND 5 SIZE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-433-3254, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
211066607
NSN: 5340-00-433-3254
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
drive_typeHEX SOCKET OR SCREW SLOT OR SERRATED OR SQUARE HEAD
design_typeTHREADED
thread_class2A A
overall_diameter1.000 INCHES MAXIMUM IN
features_providedSHOULDER
nondefinitive_spec/std_data1 TYPE AND 1 CLASS AND 5 SIZE
thread_size_and_series/type_designator1/2-20 UNF
NSN5340-00-433-3254
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 211066607 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2A A
•
DRIVE TYPE: HEX SOCKET OR SCREW SLOT OR SERRATED OR SQUARE HEAD
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1/2-20 UNF
•
OVERALL DIAMETER: 1.000 INCHES MAXIMUM IN
•
DESIGN TYPE: THREADED
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 CLASS AND 5 SIZE
•
FEATURES PROVIDED: SHOULDER
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2A A
DRIVE TYPEHEX SOCKET OR SCREW SLOT OR SERRATED OR SQUARE HEAD
THREAD SIZE AND SERIES/TYPE DESIGNATOR1/2-20 UNF
OVERALL DIAMETER1.000 INCHES MAXIMUM IN
DESIGN TYPETHREADED
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 CLASS AND 5 SIZE
FEATURES PROVIDEDSHOULDER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
5340PL1879681Upgraded Successor
successor cross-reference
successor
P5Upgraded Successor
successor cross-reference
successor
75STUpgraded Successor
successor cross-reference
successor
402D3150AUpgraded Successor
successor cross-reference
successor
402D3150Upgraded Successor
successor cross-reference
successor
75Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 211066607?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211066607?
211066607 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 211066607?
There are 15 known substitutes for 211066607: 5340PL1879681, P5, 75ST and 12 more. Substitute compatibility should be verified for your specific system.
Is 211066607 still available?
211066607 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211066607

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026