PartsTable
Technical Data Sheet
Download PDF

211060305 — SEAT,HELICAL COMPRESSION SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

211060305: SEAT,HELICAL COMPRESSION SPRING.

SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: STEEL COMP 4140, design_type: SOLID, end_diameter: 0.4690 INCHES NOMINAL IN, bore_diameter: 0.3890 INCHES MINIMUM AND 0.3970 INCHES MAXIMUM IN, overall_height: 0.3800 INCHES NOMINAL IN, style_designator: SEAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-408-7988, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
211060305
NSN: 5340-01-408-7988
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 4140
design_typeSOLID
end_diameter0.4690 INCHES NOMINAL IN
bore_diameter0.3890 INCHES MINIMUM AND 0.3970 INCHES MAXIMUM IN
overall_height0.3800 INCHES NOMINAL IN
style_designatorSEAT
first_step_diameter0.7810 INCHES NOMINAL IN
distance_from_end_to_first_step0.3200 INCHES NOMINAL IN
material_document_and_classificationMIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-408-7988
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 211060305 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 0.7810 INCHES NOMINAL IN
•
END DIAMETER: 0.4690 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST STEP: 0.3200 INCHES NOMINAL IN
•
DESIGN TYPE: SOLID
•
STYLE DESIGNATOR: SEAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE
•
BORE DIAMETER: 0.3890 INCHES MINIMUM AND 0.3970 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.3800 INCHES NOMINAL IN
FIRST STEP DIAMETER0.7810 INCHES NOMINAL IN
END DIAMETER0.4690 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST STEP0.3200 INCHES NOMINAL IN
DESIGN TYPESOLID
STYLE DESIGNATORSEAT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE
BORE DIAMETER0.3890 INCHES MINIMUM AND 0.3970 INCHES MAXIMUM IN
MATERIALSTEEL COMP 4140
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
561-6404325-36Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 211060305?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211060305?
211060305 is a SEAT,HELICAL COMPRESSION SPRING.
What parts can replace 211060305?
There is 1 known substitute for 211060305: 561-6404325-36. Substitute compatibility should be verified for your specific system.
What is the NSN for 211060305?
211060305 is cataloged in the U.S. Government catalog under NSN 5340-01-408-7988. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211060305

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.